Errors excepted, subject to availability and modifications.
E 05/2020 | A 05/2020, Copyright © 2000-2020 innovaphone® AG
innovaphone® AG | Umberto-Nobile-Str. 15 | D-71063 Sindelfingen | Phone +49 7031 73009-0 | www.innovaphone.com | E-Mail: [email protected]
9 / 12
innovaphone IP101/102 – User Guide
Further Functions:
Quick transfer: Press
and dial the destination number. On hanging up, the call is transferred to the
destination number and the caller hears the ringing tone until the destination accepts the call.
Blind tranfer: Press redial key
and dial the destination number. By pressing the redial button
again,
both calls are connected without the caller being on hold.
To end a call, you can either put the handset back or tap with your finger on the capacitive sensor on the
hook switch (upper part of the handset rest).
Using a Headset
The headset becomes active when it is plugged into the USB port. This is indicated on the display with the
headset symbol (IP102 only). A special installation is not necessary. This means that the first control
element for telephoning is no longer the handset, but the headset.
There is a headset key
on the phone. This key can be used to accept and hang up calls when using the
headset (IP102 only). Accepting calls on the appropriate operating element on the headset can only be
guaranteed if the headset is listed with this function in the innovaphone compatibility list. The list can be
found on wiki.innovaphone.com and is also available via the web page for innovaphone IP101 and IP102 IP
phones.
The IP101 and IP102 IP phones are identical in construction, so there is a headset key on both devices. In
order to connect special headsets instead of the handset on the IP101 and to operate a headset using the
headset key, the headset key on the IP101 can be activated by the administrator.