Innova Srl
Page 33
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
7
MAINTENANCE
To always ensure correct and optimal operation of the unit, all maintenance interventions must be carried out periodically.
7.1.1
CLEANING OR REPLACING FILTERS
To replace the filters or to clean them, proceed as follows:
•
disconnect the unit from the power supply;
•
open the lower external aesthetic covers by removing the fixing
screws
•
then open the filter holder caps by removing the additional fixing
screws
•
remove the dirty filters;
•
insert the new filters carefully;
•
close the lid with the dedicated knobs;
If the conditions of the filters allow it, they can be cleaned using a vacuum
cleaner or a low pressure compressor.
View for filter extraction
