Innova Srl
Page 11
N420355A_Manuale-SLC 2022_EN_Rev 03.docx
Do not mount the unit with the sides or surfaces in direct contact
with the walls to avoid possible contact noises, insert strips of
rubber or neoprene in this case.
Ceiling mount
Wall mounting
To mount the unit on the wall you need:
•
Use the 4 mounting holes on the rear of the unit;
•
Fix the unit to the wall, using the brackets, using suitable
anchoring systems (dowels, threaded bars, chains…) and
check the leveling with the help of a level.
•
Ensure sufficient space for carrying out maintenance
activities: the opening of the unit cover (front) and
accessibility to the electrical box and to the hydraulic
connections must be guaranteed;
Do not mount the unit with the sides or surfaces in direct contact
with the walls to avoid possible contact noises, insert strips of
rubber or neoprene in this case.
Wall mounting
2.3
CONDENSATE DRAIN CONNECTION
For the heat recovery unit to function correctly, a condensate drain must be connected to the plumbing system (drain) of the house. Furthermore, to
allow the condensate water to flow correctly and avoid unpleasant odors, the condensate drain must always be equipped with the appropriate
siphon to be placed on the drain line by the installer;