INNOSILICON T2T-24T BTC, Руководство пользователя

Страница: 4 / 11

1
2. Assemble the miner
2.1 Open the package to check the miner
⚫ Check whether the warranty sticker is damaged, especially the one on
hash boards PSU port side. If the warranty sticker is damaged when you
receive the miner, please contact our after-sales personnel in time.
⚫ Before assembling the miner, pls shake the miner gently. Please contact
our after-sales personnel immediately if there is metallic collision
sound.
⚫ Check whether the two fans work well, if you find the fans broken please
contact our after-sales personnel.
⚫ The wiring of the miner shall not be changed including the power cable
and data cable interface as shown in the figure below.
Notes:
There is an indicator on each hash board, which shows the work status of the hash board.
Being constantly lit means the hash board works properly.
Flickering represents overtemperature of the hash board. Please check the fans of the miner,
environment temperature and the ventilation conditions.
Being off means the hash board does n’t work . Please try to reboot the miner or change the
data cable. Pls contact our after-sales team if the problem still exists.