InnoMedia MTA8000 Series Administrative Guide
Page 57
Copyright © 2022 InnoMedia. All rights reserved.
Enable SNTP
Enable the SNTP service.
Retry Interval
The time interval at which to synchronize
with the time server, in seconds.
SNTP Server #1, #2,
and #3
FQDN or IP of SNTP time servers to
synchronize with.
(Note: MTA tries all the configured servers,
and bases its calculation on RFC 2030 and
the delay. It then uses the lowest delay as
the peer updates and sets the local time.)
5.10
Language
The MTA device supports English, Spanish for Interactive Voice Response (IVR) services. Select the desired
language for your needs.
Figure 49. Language Selection for IVR system
Field Name
Description
IVR Language
Setting
The language of IVR announcements.
5.11
Uplink Connection
Figure 50. Uplink Detection Settings
Field Name
Description
Check Uplink
Network
Connection
Enable or disable the MTA to probe the
internet connection status.
Check Interval
How often device will send
a ‘probe’
message out to determine whether the
Internet connection is active. Set value to 0
