34
December 2008 - InnoMedia
© 2001 InnoMedia. All rights reserved.
InnoMedia iPBX Administrative Guide
with iPBX. Be sure to revise the “Port” value to “5061” if TLS is
checked.
CA root certification
If TLS is enabled, you have to load the 'CA root certification' file
issued by your service provider to iPBX. Browse ‘CA Root
Certification’ document provided by your service provider and
upload to iPBX by clicking <APPLY>.
Limit Simultaneous Outgoing
Calls
Enabled only if required.
Figure 5.6 SIP registration profile to the service provider.
4.8
Assigning Extension Numbers to Analog Devices
The iPBX is equipped with 4 analog interfaces (FXS ports) to which analog devices, such as POT analog
phones, low speed modem for credit card reader or fax machines, may connect.
The procedure of adding analog devices is similar to adding users and assigning both internal extensions
and DID/DOD to communicate external world.
1.
Assigning internal extension to analog devices. Go to the page Telephony
Settings
Ext. Analog
phones.
2.
Click any port number that you plan to configure. The edit box displays at the bottom. Assigning the
values as follows.
Value
Description