3-3
Basic Operation
3
Flat Panel Sensors Operation Manual 897N200608
[2] Bed type
CAUTIONS
When inserting the flat panel sensor
to the radiographic examination stand,
direct the exposure plane upwards.
1
Pull out the tray by using the handle.
Tray
2
Pull the cassette stopper, and set the flat
panel sensor so that its center mark is
aligned with the center of the stopper.
Cassette
stopper
Center mark
3
Push the tray back into place by using the
handle after setting the flat panel sensor.
4
Remove the flat panel sensor after use.
Hold the handle and pull out the tray. Remove the
flat panel sensor while pulling the cassette stopper,
and then push the tray back into place.
3.1.4 Charging the Battery Pack for the Flat Panel Sensor
Use the battery charger recommended by INNOLUX Corporation.
For details on operations, refer to the instruction manual for the battery charger.
