3-2
Basic Operation
3
Flat Panel Sensors Operation Manual 897N200608
CAUTIONS
Before inserting/removing the fl at panel sensor into/from the radiographic examination stand,
pull out the tray completely. Otherwise, the fl at panel sensor may be damaged.
[1] Upright type
CAUTIONS
When inserting the fl at panel sensor into
the radiographic examination stand, direct
the exposure plane toward the X-ray tube.
1
Pull out the tray.
Tray
2
Insert the fl at panel sensor into the cassette
receive with the green mark of the fl at panel
sensor up, and then move it downwards.
Cassette receive
Green mark
3
Set the fl at panel sensor to the upper part of the tray.
4
Push the tray back into place after setting
the fl at panel sensor.
5
Remove the fl at panel sensor after use.
Pull out the tray, push the cassette receive
downwards, and then remove the fl at panel sensor.
Push the tray back into place.
