12
GB
Loosen the two buckles
Hold the handle and take out the head
HOW TO USE
• Put the lid over the base (5) and fix it on the tank with the special locking
tabs (4).
• Connect the metal pipe (1) with the metal flexible hose(2) and insert
the hose connector into the appropriate inlet (10), making sure that the
protuberance on the pipe matches with the groove in the suction inlet. Turn
the connector clockwise to lock it in place.
• Insert the plug into the power outlet, making sure that the appliance
voltage corresponds to the one of the local network. The appliance power
supply data can be found on the label on the lid.
• To turn the ash vacuum cleaner on, move the switch (6) to the “I” position.
• To turn the ash vacuum cleaner, move the switch to the “O” position.
• To activate the “Blowing” function, in order to remove the ash and blow it
away, it is necessary to insert the flexible hose in the other hole on the lid
(3). Move the switch (6) to the “I” position. To stop the “Blowing” function,
move the switch to the “O” position.
It is advisable to empty the bin from the ash before activating the “Blowing”
function.
Cleaning and maintenance
If the suction force decreases during use, turn off the ash vacuum and hold the
nozzle and the pipe in a vertical position in order to let the ash freely fall into
the container and then proceed by emptying the container itself: remove the
suction pipe (2 ), unlock the lid with the locking tabs and empty the container
following the instructions below:
