Innolas Laser nanio Series, Руководство пользователя и инструкция по установке

Страница: 21 / 48

2.6.3. Nominal weights
Laser head 17–23 kg depending on length and configuration
Power supply unit 12 kg
Water/air chiller low power 35 kg; medium power 40 kg
Water/water chiller 20 kg
2.6.4. Customer connections
Customer connections for control and safety circuits are available on the rear of the
power supply. Interfacing details are given in the Interfacing chapter (Chapter 9).
2.6.5. Performance
Refer to the product data sheet.
2.6.6. Environmental
Ambient temperature range
Working 15–40°C, non-condensing
Transport and storage Greater than 2°C
Relative humidity and conductive dust
The nanio must not be installed in an environment with conductive dust or
condensation.
Altitude range
0–3000 m
Shock, vibration and acceleration
The nanio is robust in normal operation but may be damaged by dropping or when
subject to severe vibration and shocks, such as those encountered during transport
over rough or uneven floors.
2.6.7. Design lifetime of the equipment
The nanio system is designed for a maximum use of ten years from initial date of
shipment. After this period it should be decommissioned or returned to InnoLas for
refurbishment.
nanio Industrial DPSS Laser User and Installation Manual
13 2. General Description