INNO View 950M, Руководство пользователя

Страница: 50 / 55

View950M Multi-Scan
INNO Instrument Inc. Page 50 of 55
There are three ways to find Multi Target Search according to the transition setting. The differences
are as follows.
Multi Target – Transition
Both Positive Negative
- Negative & Positive one pair
search
- When the trace is valley type or
mountain type, it displays
three valleys or mountains
through which the target value
passes.
- Display marker at the point
where the flow of the trace
passing the target value goes
up
- Displays 6 pieces sequentially
from the left
- Display marker at the point
where the flow of traces
passing target value goes
down
- Displays 6 pieces sequentially
from the left
4.2.2. M
ULTI
T
ARGET TO
S
INGLE
L
IMIT
The VIEW950M can easily set the data found in Multi Target to single limit line. Below is how to set
Multi Target data to Single limit.
1. Multi Target Search
- Target value setting to set
- Perform Multi Target
- Confirm activation of "Transfer to Single Limit"
2. Tolerance setup
- Single Limit Amplitude Low,
High Range Setting
- In other words, it is (Target
Value ± Tolerance)