Inmes FF-325 PLUS, Руководство по эксплуатации

Страница: 19 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 17
5.3 Precise ruler adjustment (Pic. 5.3)
Tools required for assembly:
- Ruler, Square, Depth Gauge
- Feeler clock.
- Wrench 24mm.
- Use square A and the probe to check the 90 °
angle between the table and the ruler. Loosen the
4 axes B, and precisely adjust their positions for
good perpendicularity.
- Use the ruler, probe and depth gauge to check
that the ruler is parallel to the blade.
- Loosen the 4 axes B and adjust the ruler so that
it is precisely parallel with the blade.
(Pic. 5.3)
6. OPERATION PROCEDURES
Take special care while the sawing machine is turned on and never operate the machine without guards
and safety equipment in place and operating in perfect condition. Never put your hands in contact with
the saw blade when it is turning.
6.1 Turning the machine on and off (Pic. 6.1)
The panel buttons are arranged as shown in figure
6.1.
- A is the main power lamp.
- B is the button to turn off the main power.
- C is the button to turn on the saw power.
- D is the button to turn on the scribble power.
- And it is the emergency button which turns off all
power to the machine.
- F is the display indicating the angle of inclination
the saw is currently in.
(Pic. 6.1)