Inmes FF-325 PLUS, Руководство по эксплуатации

Страница: 12 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 10
Proper dust exhaustion eliminates the risk of dust inhalation by the operator and others working in the same
location, and provides better machine operation. The table shows the minimum air velocity and the velocities
related to each suction operation.
Check that the suction system guarantees these values on your inlet connection.
Inlet Mouth Diameter:
A - Blade dust collector........ Ø4 ”
B - Lower dust pickup......... Ø4 ”
Connect the nozzles to the exhaust system with flexible hoses or tubes of suitable diameter. Lock them with
cable ties. The connections must be positioned out of the operator's path while using the machine.
3.6 Security mechanisms (Pic. 3.6)
This machine is equipped with the following safety equipment (Pic. 3.6).
A - Security key;
This equipment stops the machine when the lower blade guard plate D is open to operate the saw.
B - Saw blade protection;
Serves to prevent the operator from touching the saw blade
C - Emergency Button;
When the button is pressed the power will be completely cut off from the machine immediately, this is a
mechanically pressed emergency button, to turn it off simply by turning the knob clockwise.
(Pic. 3.6)