Inmes FF-325 PLUS, Руководство по эксплуатации

Страница: 10 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 8
3.2 Technical specifications
SPECIFICATIONS
Motor voltage 220V/60Hz Single 220/380V/60HzThree
Main engine power 3,0cv 5,5cv
Scratch motor power 3/4cv 3/4cv
Max diameter of saw 315mm 315mm
Minimum saw diameter 250mm 250mm
Main blade speed 4000rpm 4000rpm
Scratching blade diameter 120mm 120mm
Speed scratched blade 8000rpm 8000rpm
Tilt blade 90° ~45° 90° ~45°
Main table measure 800x530mm 800x530mm
Right extensor measure 800x820mm
Ruler Max Capacity 1300mm
Max Height cutting saw 300mm 95mm-90° , 70mm-45°
Max Height cutting saw 250mm 70mm-90° , 49mm-45°
Table Dimensions 3200x375mm
Movable table offset 3350mm
Cross table 1200x630mm
3.3 Electrical installation
Electrical installation must be done by qualified and trained personnel.
- Main connections must be made by a terminal box.
- Replacement of the power cord on the machine should only be performed by a qualified electrician.
- Plug the machine's Power cords into an electrical outlet: 380V±10% or 220V±10% according to the
model in hand of the FF-325 Plus
- We recommend installing properly sized circuit breakers for this machine. With the mains voltage at
220V, a 20A circuit breaker is recommended, and at 380V, a 16A circuit breaker is recommended. For a
single phase 220V machine a 25A circuit breaker is recommended.
To prevent electric shock or fire, any maintenance or repair to the electrical system should only be
done by trained electricians using genuine parts of the machine.