28
Table 3-4-5 Firewall - Virtual IP Mapping Parameters
Virtual IP Address
Function description: Configure parameters of virtual IP address.
Parameters
Description
Default
Virtual IP address of
router
Set virtual IP address of router
N/A
Range of source address
Set range of the external source IP addresses.
N/A
Enable
Click to enable virtual IP address
Enable
Virtual IP
Set virtual IP address of virtual IP mapping
N/A
Real IP
Set real IP address of virtual IP mapping
N/A
Log
Click to enable log and the log about virtual IP
address will be recorded in the system.
Disable
Description
For recording significance of each virtual IP address
rule
N/A
3.4.6 DMZ
After mapping all ports, extranet PC can access to all ports of internal device by DMZ settings.
From the navigation tree, select Firewall >> DMZ, then enter the “DMZ” page.
Table 3-4-6 Firewall - DMZ Parameters
DMZ
Function description: Configure DMZ settings.
Parameters
Description
Default
Enable DMZ
Check to enable the DMZ.
Disable
DMZ Host
Set address of DMZ Host
N/A
Range of Source Address
Enter range of source address
N/A
Interface
Select interface as DMZ: CELLULAR/WAN/VPN
Interface
N/A
3.4.7 MAC-IP Binding
If the default process in the basic setting of firewall is disabled, only hosts specified in MAC-IP
can have an access to outer net.
From the navigation tree, select Firewall >> MAC-IP Binding, then enter the “MAC-IP Binding”
page.
Table 3-4-7 Firewall - MAC-IP Binding Parameters
MAC-IP Binding (at most 20 MAC-IP Bindings can be set)
Function description: Configure MAC-IP parameters.
