InHand InGateway501, Руководство пользователя

Страница: 148 / 204

InGateway Documentation, Release 0.0.1
1.4.5 Appendix
Factory reset
There are two ways to restore the IG501 to factory settings: hardware factory reset and software factory
reset.
• Hardware factory reset
– Step 1: After the device is powered on and the ERR light is off, press and hold the RESET key;
– Step 2: When the ERR light is always on, release the RESET key;
– Step 3: After the ERR light goes out, press and hold the RESET key again, and release the
RESET key when the ERR light flashes; wait for the ERR light to go out, indicating that the
factory reset was successful.
• Software factory reset
Choose System Management > Configuration Management, click the reset button and select OK.
IG501 will complete the factory reset operation by itself.
144 Chapter 1. InGateway Documentation Site Navigation