InHand InGateway501, Руководство пользователя, Страница: 56 / 204

InGateway Documentation, Release 0.0.1
The bridge interface parameters are described as follows:
• Primary IP: specifies the primary IP address of the bridge interface.
• Netmask: specifies the subnet mask of the bridge interface.
• Secondary IP Setting: allows you to set up to 10 secondary IP addresses in addition to the primary IP
address.
• Bridge Member
– dot11radio 1: specifies the radio interface.
– gigabitethernet 0/2: specifies interface GE 0/2.
3.3.1.5 Loopback
The loopback interface is a logical, virtual interface on the IG902. After you create and configure the loopback
interface, you can ping its IP address or set up a Telnet connection to it to test the network connectivity.
You can set or view loopback interface parameters on the Loopback page. Follow these steps to configure
the loopback interface:
1. Choose Network > Network Interfaces > Loopback to display the Loopback page. You can
set or view loopback interface parameters on this page.
2. Click the Add icon in the table under Secondary IP Setting to add a secondary IP address for the
loopback interface. (The default IP address is 127.0.0.1.)
52 Chapter 1. InGateway Documentation Site Navigation