InHand InGateway501, Руководство пользователя

Страница: 134 / 204

InGateway Documentation, Release 0.0.1
• In the configuration view, enter: username abc password 1234567
An ordinary user abc is created, and its password is set to 1234567 . Or the password of ordinary
user abc is changed to 1234567 .
• In the configuration view, enter: no username abc
The ordinary user abc is deleted.
1.4 InGateway501 Quick Start Manual
This document is used to explain the basic configuration operations of InGateway501 (IG501 for short)
networking, software version update, etc., so that users can master the basic configuration of IG501 and the
use of common functions.
• 1. Configure IG501 Network Parameters
– 1.1 Access the IG501
– 1.2 Connect IG501 to the Internet
• 2. Update the Software
– 2.1 Update the IG501 firmware
– 2.2 Upgrade the Python SDK of IG501
• 3. Python Edge Computing
– 3.1 Install and run Python App
– 3.2 Update Configuration File for App
– 3.3 Update Python App version
– 3.4 Enable the Debug Mode
• 4. Device Manager
• Appendix
– Factory reset
1.4.1 1. Configure IG501 Network Parameters
1.1 Access the IG501
• Step 1: Set the PC ’ s IP address to be on the same subnet with FE 0/1. By default, the IP address
of FE 0/1 on IG501 is 192.168.1.1.
130 Chapter 1. InGateway Documentation Site Navigation