InHand InGateway501, Руководство пользователя

Страница: 122 / 204

InGateway Documentation, Release 0.0.1
– Local Netmask: specifies the source subnet mask of the flow protected by IPsec.
– Remote Subnet: specifies the destination subnet address of the flow protected by IPsec.
– Remote Netmask: specifies the destination subnet mask of the flow protected by IPsec.
• Phase 1 Parameters
– IKE Policy: specifies the policy used for IKE negotiation, such as 3DES-MD5-DH1 or 3DES-
MD5-DH2.
– IKE Lifetime: specifies the lifetime of the IKE SA.
– Local ID Type: specifies the type of the local end ’ s identifier. Options are FQDN, User FQDN,
and IP Address.
– Local ID: specifies the ID of the local end. You need to set this parameter only when the local
ID type is set to FQDN or user FQDN. Enter an ID of the specified type. (A user FQDN must
be a standard email address.)
– Remote ID Type: specifies the type of the remote end ’ s identifier. Options are FQDN, User
FQDN, and IP Address.
– Remote ID: specifies the ID of the remote end. You need to set this parameter only when the
remote ID type is set to FQDN or user FQDN. Enter an ID of the specified type. (A user FQDN
must be a standard email address.)
– Authentication Method: specifies the authentication method used for the IPsec tunnel. Shared
key authentication and digital certificate authentication are supported.
– Key: specifies the key used for IPsec negotiation. Set this parameter when shared key authenti-
cation is used.
• Phase 2 Parameters
– IPsec Policy: specifies the policy used for IPsec negotiation, such as 3DES-MD5-96 or 3DES
–SHA1-96.
– IPsec Lifetime: specifies the lifetime of the IPsec SA.
Caution: You must create inbound and outbound rules for each tunnel. A filtering policy will not be applied
if it contains only the rule for one direction.
1.2.5 5. FAQ
5.1 How Do I Restore Factory Settings Through Hardware?
Follow these steps:
1. Find the RESET key on the operation panel.
2. Hold down the RESET key within 10s after the device is powered on.
118 Chapter 1. InGateway Documentation Site Navigation