InHand InGateway501, Руководство пользователя

Страница: 120 / 204

InGateway Documentation, Release 0.0.1
* Shutdown: disables the I/O interface.
* 0-20mA: indicates that the range of current is 0-20 mA.
* 4-20mA: indicates that the range of current is 4-20 mA.
* 0-5V: indicates that the range of voltage is 0-5 V.
* 0-10V: indicates that the range of voltage is 0-10 V.
– Collect Interval: specifies the interval at which the device reads the voltage or current value on
the I/O interface. The value 0 indicates that the device does not reach the voltage or current
value on the I/O interface.
4.6 Wizards
The Wizards page provides simplified configuration of general settings to help you complete simple, basic
configuration of the IG902 quickly. The configuration result is not displayed on the Wizards page, but you
can view the configuration result on the page of the corresponding feature.
4.6.1 New LAN
The parameters on the New LAN page are described as follows:
• Interface: specifies the interface on which the LAN is created.
• Primary IP: specifies the primary IP address of the interface. Set or change the primary IP address as
required.
• Netmask: specifies the subnet mask of the interface. (It can be automatically generated.)
• DHCP Server: enables or disables the DHCP server feature.
– Starting Address: specifies the start IP address of the IP address pool for dynamic address
allocation.
– Ending Address: specifies the end IP address of the IP address pool for dynamic address alloca-
tion.
– Lease: specifies the validity period of a dynamically allocated IP address. The valid value range
is 30-10080, and the unit is minute.
4.6.2 New WAN
The parameters on the New WAN page are described as follows:
• Interface: specifies the interface on which the WAN is created.
• Type: specifies the type of the IP address assigned to the WAN interface. Options are Static IP,
Dynamic Address (DHCP), and ADSL Dialup (PPPoE).
116 Chapter 1. InGateway Documentation Site Navigation