5
Step 2: Revolve the device in the direction indicated by arrow 2, and grab the lower end
of the device and move the device outward. Lift the device when its lower end isolates from
the DIN rail. Then, take off the device from the DIN rail.
Figure 3-2 DIN rail disassembly schematic diagram
3.2.
Installing and Uninstalling the Device in Wall-mounted
Mode
3.2.1.
Installing in Wall-mounted Mode
Procedure:
Step 1: Select an installation place and reserve enough space for installation.
Step 2: Install the wall mounting bracket on the back of the device by using a screwdriver,
as shown in Figure 3-3.
Figure 3-3 Wall mounted installation diagram
1
2
