4
3.
Installation
Precautions:
Power supply requirements: 24 V DC (12–48 V DC). Pay attention to the voltage
class. The rated current is 0.6 A (1.2–0.3 A).
Environment requirements: operating temperature –25°C to 75°C; storage temperature
–40°C to 85°C; relative humidity 5% to 95% (non-condensing). The temperature on the
device surface may be high. Install the device in a restricted area and assess the
surrounding environment.
Avoid direct sunlight and keep away from thermal sources or areas with strong
electromagnetic interferences.
Install the gateway product on an industrial DIN-rail.
Check whether the required cables and connectors are installed.
3.1.
Installing and Uninstalling the Device on a DIN-Rail
3.1.1.
Installing with a DIN-Rail
Procedure:
Step 1: Select an installation place and reserve enough space for installation.
Step 2: Insert the upper part of the DIN rail seat onto the DIN rail. Grab the lower end of
the device and revolve it upward in the direction indicated by arrow 2 with gentle force, to
insert the DIN rail seat onto the DIN rail. Check that the device is installed reliably on the
DIN rail, as shown in Figure 3-1 on the right.
Figure 3-1 DIN rail installation schematic diagram
3.1.2.
Uninstalling with a DIN-Rail
Procedure:
Step 1: Press the device downward in the direction indicated by arrow 1 in Figure 3-2 to
create a gap near the lower end of the device so that the device isolates from the DIN rail.
1
DIN rail seat
DIN rail
2
