11
4.3.
Performing Dial-up on the Gateway
4.3.1.
Configuring Gateway Dial-up
IG902 supports two dial-up modes: single card and dual card. The single card mode is
used by default, in which only SIM card 1 is used.
To use the dual card mode, you need to set related parameters. On the page shown in the
following figure, choose
Show Advanced Options
>
Dual SIM Enable
, select the primary
card, and save the settings.
Figure 4-2 Dial interface advanced options
4.3.2.
Verifying the Gateway Dial-up Status
Choose
Network
>
Cellular
in the navigation tree to access the
Status
page. The page
displays the network connection status, that is, the IP address obtained by the gateway. You
can also verify the dial-up status on a web page.
