8
3.5.
Installing the Power Supply
Procedure:
Step 1: Remove the terminal from the gateway.
Step 2: Unfasten the locking screw on the terminal.
Step 3: Connect the power cable to the terminal and fasten the locking screw.
Figure 3-7 Installing the Power Supply
3.6.
Installing the Ground Protection
Procedure:
Step 1: Unfasten the ground screw cap.
Step 2: Put the ground loop of the cabinet ground cable onto the ground post.
Step 3: Fasten the ground screw cap.
Caution
Ground the gateway to improve its interference resistance. Connect the ground
cable to the ground post of the gateway based on the operation environment.
3.7.
Connecting the Network Cable
Connect the gateway to a PC directly by using the Ethernet cable.
