Inglesina Zippy lounge, Инструкция по эксплуатации

Страница: 20 / 60

UK
0
OPENING THE STROLLER
1
Pull the latch trigger (A) on the right-hand handle
upwards, then open the stroller by pulling the handle
itself upwards.
Give the handle a sharp, upward tug to click the
lower latches into position.
3
To complete opening press down on the central
locking mechanism (B) with your foot as illustrated
until it locks horizontally.
4
Make sure that all closure mechanisms are
properly locked on both sides before use.
REAR WHEEL BRAKE
To set the brake push the levers (G), on the rear
wheels, downwards with your foot.
To ensure your child’s safety at all times always
set the brake when you stop and always make
sure the brake is locked in place.
FRONT WHEEL LOCK-RELEASE MECHANISM
6
The frame is fitted with swivel wheels which can
be locked in place or released simply by acting on lever
(F) on the front wheels.
REAR FOOTREST
Act with the foot on the rear platform to ease the
passing of hindrances.
HOOKING OF THE BACKREST TO CONVERT THE
FRAME INTO A STROLLER
8
Position the backrest on the frame. Insert the
two ends (L) in their seats (M) on both sides of the
stroller.
9
Then, insert the two ends (N) of the backrest
adjusting device in their proper seats (O) on both sides
of the stroller.
10
Insert the string (P) in its seat located in the rear
part of the seat support.
11
Insert the buckle of the leg separator in its proper
seat positioned in the front part of the seat support.
1
Insert the levers (Q) of the footrest in the proper
holes on the padding.
13
Fasten the armrest cover (R) in its proper seat.
Before sitting the child in the stroller, always make sure
that the cover is correctly attached to the armrest. The
cover coupling device also allows accessories to be
fitted (see accessory instructions).
14
The armrest cover can be removed to allow the
hooking of the Huggy car seat in the stroller version.
Push upwards from under the armrest.
To re-assemble it, insert the front part in the opening
on the armrest and push downwards.
HOW TO ADJUST THE BACKREST
1
It is possible to adjust the backrest in 4 different
positions. To lower it, act on the central mechanism
(S) on the backrest itself and lower it to the desired
position. To raise it, instead, just push the backrest
upwards and it will lock into place automatically.
FOOTREST ADJUSTMENT
16
To lower the footrest slide both the levers (T) (in
the lower part of the footrest itself) forwards while
simultaneously pushing the footrest downwards. To
raise the footrest just pull it upwards: it will lock in
place automatically.
HOW TO ASSEMBLE THE CARRY COT
1
The carry cot is equipped with two rigid inserts
(L1) and (L2) which have to be assembled correctly
in their proper seats on the head side and feet side
before use.
18
Place the insert (L1) in its proper seat (M1)
19
Place the insert (L2) in its proper seat (M2)
0
Adjust the carry cot with the hands checking that
the 4 sides are in vertical position
HOW TO HOOK THE CARRY COT TO THE
STROLLER
1
Lift the platform to its intermediate position as
shown by figure 16. Insert the head side of the carry
cot on the platform
Hook the central button
3
Hook the two side straps N to the stroller
blades
4
Lift the backrest as shown by figure 15 to ease
the insertion of the carry cot on the feet side.
Insert the feet side of the carry cot on the
backrest
6
Completely lower the backrest
Hook the two straps (O) to the rear blades of the
stroller
CAUTION! For a correct and safe use of the
stroller, always hook the two straps (O)
8
The carry cot is equipped with a coat that can be
opened or removed by simply acting on the zipper
CLOSING THE STROLLER
9
CAUTION! Should the carry cot be
assembled on the stroller, before closing this
latter, unhook the straps (O)
30
First of all, raise the backrest to its vertical
INSTRUCTIONS