background image

INGICS

TECHNOLOGY

Access Point, when it is ready, then press the WPS button on the iGS01S device( the WPS button

needs to be pressed for over 1 sec) to join it.

Reset to Default

In case you need to go back to the original settings, keep pressing the reset/default button

in your device for over 5 secs no matter in which mode the device is. The WiFi LED will be turned

off and when you release the button, the iGS01S will reboot to its default settings(AP mode).

Firmware Upgrade

Check AP002_iGS01_Firmware_Upgrade for details.

LEDs

There are two LEDs to indicate current status like the right figure. The upper one is BLE LED and

the lower one is WiFi LED. Below are their behaviors.

On

Flash

BLE LED

find tag/beacon in range

BLE transmission happening

WiFi LED

AP mode: AP is ready for
connect
Station mode: connect to
assigned AP successfully

WiFi transmission happening

The device quickly blinking
while joining AP during boot

Create Connection

iGS01S is in Access Point(AP) mode defaultly. If you have no idea what mode currently it is in,

please press the multi-function button to reset it to the default state. In AP mode, you could scan and

connect it with the WiFi of your NB/PC/Mac/Tablet/Smartphone. It’s name is just like the above figure

with part of the mac address. The default key to connect with it is “12345678”. You can change it later

when you get into the web UI.

After connection, enter IP address 192.168.10.1 in your browser. The default account/password

are both “admin”. You can change the password later. In web UI, any change needs to be saved first.

After all changes made, click reboot to make the changes effective. When In Station mode, the IP

address of the iGS01S is assigned by the other AP. To get into the web UI, you have to find the assigned

IP address. The following sections describe details of the web UI.

INGICS TECHNOLOGY CO., LTD.    •    [email protected] •    WWW.INGICS.COM

4

Содержание iGS01S













Отзывы: