Ingeteam INGEREV FUSION Street FW1AW, Инструкция по установке и эксплуатации, Страница: 21 / 184

ABW2011IQM01_C - Installation and Operation Manual
EN
ES
FR
IT
It should be borne in mind that moderate condensation may occasionally occur as a consequence of temperature
variations. For this reason, apart from the unit's own protection, it is necessary to monitor these charging stations
once they have been started up on sites where the conditions described above are not expected to be present.
In the event of condensation, never apply voltage to the unit.
5.3. Supporting Surface and Fastening
INGEREV FUSION Street
INGEREV FUSION Street units must be attached to an even and solid surface, and must be placed in a perfectly
vertical position.
To calculate the minimum concrete pad, take into account the following details.
>100
>100
>350
>300
>465
Front of the station
>100
• Minimum distance from the anchor bolts to the edges of the concrete pad: 100 mm.
21
Preparation for installing the unit Ingeteam