Ingeteam INGECON SUN 3Play 100TL, Инструкция по установке и эксплуатации

Страница: 67 / 336

67
Unit description Ingeteam
ABS2011IQM01_G - Installation and Operation Manual
DE
EN
ES
FR
IT
PT
2. Unit description
INFO
If you need more detailed information about the specifications of the inverter, request document
ABI0000IMC02 from Ingeteam.
2.1. Overview
The basic purpose of an inverter is to convert the direct current generated by the PV array into alternating current
to feed into the electricity grid. Additionally, its purpose is to find the maximum power point in the PV array and
comply with the minimum requirements for the different electric grid support regulations.
The power structure of these inverters achieves a high performance with a flat curve, minimizing the cost and
weight of the inverter.
These inverters have two distinct parts: the top compartment and the lower compartment.
Top compartment
Lower compartment
CAUTION
All the tasks required for the correct use and maintenance of the inverter are carried out in the lower
compartment.
The top compartment must not be opened under any circumstances. If it is opened the warranty will be voided.
These inverters do not have a transformer for the connection of PV arrays isolated from the electricity grid. It is
offered in two versions, which are described below.
2.2. Versions
Depending on the installation requirements there are different versions of these units: STD and PRO.
STD Version
• DC input via a single wire, terminal and packing gland.
• DC switch.
• Type-2 AC and DC surge arresters.