Ingeteam INGECON SUN 1Play TL M, Инструкция по установке и эксплуатации

Страница: 98 / 312

There are three different states:
Not performed No autotest running and none has been performed during the time in which the inverter has
been switched on.
Reconnection State awaiting reconnection for the next measurement after an Fmax, Fmin, Vmax or Vmin
check.
Completed A full autotest has been carried out during the time in which the inverter has been switched on.
To start the autotest, press on Start Autotest . Access Result to consult the results of the different tests,
observing whether the result is correct or incorrect. An autotest can be stopped when running by pressing on
Stop Autotest .
The results screens for an autotest are then displayed if the test has been completed and a second case in which
the test has not been completed:
2016-01-11 10:17 2016-01-11 10:17 2016-01-11 10:17 2016-01-11 10:17
Autotest complete, correct result Autotest not complete, no result
10.24. Change display language
To change display language, access the Main menu > Settings > Languages .
10.25. Change date and time
To change the inverter's date and time access Main menu > Settings > Date & time .
10.26. Perform a partial delete of accumulated data
These inverters have total and partial meters for energy produced, connected time to grid and number of
connections to grid made. This data may be viewed in
Main menu > Monitoring .
If you wish to delete the partial meters, access Main menu > Settings > Partial delete .
10.27. Block inverter screen
If you want to block the keypad/screen together to avoid undesired changes access Main menu > Advanced settings
> Block display and enable the block. To unblock it, press in this order for three seconds. Re-access
Main menu > Advanced settings > Block display and disable block.
Pressing you access the configured country / regulations information.
98
Display control Ingeteam
ABE2011IQM01_C - Installation and Operation Manual