Ingeteam INGECON SUN 1Play TL M, Инструкция по установке и эксплуатации

Страница: 96 / 312

* This historical meter returns to zero if reset to default settings.
10.18. Monitor the inverter's variables
The monitoring of the inverter variables allows you to see the inverter's operating data in real time.
To view the monitoring, access Main menu > Monitoring and browse through the different screens via the keypads
and .
The different monitored variables are listed below:
Pac Inverter AC power, in watts.
Qac Inverter AC reactive power, in reactive volt-amperes.
Sac Inverter AC apparent power, in volt-amperes.
CosPhi Cosine of Phi. Cosine of the phase shift angle between the voltage and current supplied by the
inverter. The cosine of phi can be positive or negative:
• Positive: the inverter injects positive reactive energy. The current is ahead with respect to
the voltage.
• Negative: the inverter injects negative reactive energy. The current is delayed with respect
to the voltage.
Vac AC voltage of the inverter, in volts.
Iac AC current through the inverter, in amperes.
Fac Frequency generated by the inverter, in hertz.
Pdc Inverter DC power, in watts.
Pdc1 String 1 DC power, in watts.
Pdc2 String 2 DC power, in watts.
Riso Insulation resistance of the PV array, in kiloohms.
Vdc1 DC input voltage of string 1.
Vdc2 DC input voltage of string 2.
Idc1 DC input current of string 1.
Idc2 DC input current of string 2.
Total
Energy Total energy fed through the inverter throughout its useful life.
Time Total time that the inverter has been feeding the grid.
Connections Total number of grid connections.
Partial
Energy Partial energy fed by the inverter.
Time Partial time that the inverter has been connected to the grid.
Connections Partial number of grid connections.
Pac AC power, in watts
Pwatt Power fed to the public grid in self consumption mode, in watts.
Ratio Self consumption ratio. Displays the consumption percentage of the loads being fed by the power
generated by the inverter.
10.19. List of alarms, warnings and reasons for shutdown
During the unit's operation, you can produce alarms, warnings and shutdown reasons.
96
Display control Ingeteam
ABE2011IQM01_C - Installation and Operation Manual