Ingeteam INGECON SUN 1Play TL M, Инструкция по установке и эксплуатации

Страница: 68 / 312

4.6TL M 5TL M 5.5TL M 6TL M
DC inputs
Recommended power range of PV array
(1)
5.2 ~ 6 kWp 5.7 ~ 6.5 kWp 6 ~ 6.8 kWp 6.3 ~ 7 kWp
Maximum input voltage
(2)
850 V 850 V 850 V 850 V
Voltage range MPP1
(3)
125 ~ 750 V 125 ~ 750 V 125 ~ 750 V 125 ~ 750 V
Voltage range MPP2
(3) (4)
90 ~ 750 V 90 ~ 750 V 90 ~ 750 V 90 ~ 750 V
Operating voltage range
(4)
90/125 ~ 850 V 90/125 ~ 850 V 90/125 ~ 850 V 90/125 ~ 850 V
Minimum voltage for Pnom with DC inputs
in parallel
216 V 234 V 258 V 281 V
Maximum short circuit current
(input 1 / input 2)
13 / 13 A 13 / 13 A 13 / 13 A 13 / 13 A
Maximum inverter backfeed current to the
array
0 A rms 0 A rms 0 A rms 0 A rms
MPPT 2 2 2 2
Number of strings 2 2 2 2
Strings per MPP 1 1 1 1
Maximum input current
(input 1 / input 2)
11 / 11 A 11 / 11 A 11 / 11 A 11 / 11 A
Maximum input current per string 11 A 11 A 11 A 11 A
AC output
Nominal power (up to 45 ºC) 4.6 kW 5 kW 5.5 kW 6 kW
Maximum continuous power 4.6 kW 5 kW 5.5 kW 6 kW
Max. temperature for nominal power
(5)
58 ºC 55 ºC 50 ºC 45 ºC
Maximum current 26.2 A 26.2 A 26.2 A 26.2 A
Maximum transient current 26.2 A 26.2 A 26.2 A 26.2 A
Maximum output fault current < 30 A rms (60 ms)
Maximum output overcurrent protection 30 A rms 30 A rms 30 A rms 30 A rms
Rated voltage 230 V 230 V 230 V 230 V
Voltage range 122 ~ 265 V 122 ~ 265 V 122 ~ 265 V 122 ~ 265 V
Nominal frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
Cosine of Phi 1 1 1 1
Adjustable cosine of phi Yes. Smax = 4.6 kVA Yes. Smax = 5 kVA Yes. Smax = 5.5 kVA Yes. Smax = 6 kVA
THD < 3 % < 3 % < 3 % < 3 %
Performance
Maximum efficiency 97.9 % 98 % 98 % 98 %
Euroefficiency 97.5 % 97.6 % 97.6 % 97.6 %
General data
Cooling system Natural convection
Weight 21 Kg 21 Kg 21 Kg 21 Kg
Measurements (height x width x depth) 470 x 360 x 180 mm
Standby current (6) < 10 W < 10 W < 10 W < 10 W
Night consumption 0 W 0 W 0 W 0 W
Operating temperature – 25 ~ +65 ºC – 25 ~ +65 ºC – 25 ~ +65 ºC – 25 ~ +65 ºC
Relative humidity (without condensation) 0 ~ 100 % 0 ~ 100 % 0 ~ 100 % 0 ~ 100 %
Maximum altitude of the installation 3000 m 3000 m 3000 m 3000 m
Protection class IP65 IP65 IP65 IP65
Markings CE
EMC and safety regulations
EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 61000-3-11, EN 61000-3-12, EN
62109-1, EN 62109-2, IEC62103, EN 50178, FCC Part 15, AS3100
Grid connection regulations
RD1699/2011, DIN V VDE V 0126-1-1, EN 50438, CEI 0-21, VDE-AR-N 4105:2011-08, G59/2,
P.O.12.3, AS4777.2, AS4777.3, IEC 62116, IEC 61727, UNE 206007-1, ABNT NBR 16149, ABNT
NBR 16150, South African Grid code, Chilean Grid Code, Romanian Grid Code, Ecuadorian Grid
Code, Peruvian Grid code, IEEE 929, Thailand MEA & PEA requirements
(1)
Depending on the type of installation and the geographic location.
(2)
Never exceed this value. Consider the voltage increase of the panels ‘Voc’ at low
temperatures.
(3)
The output power will be determined by the voltage and current configuration selected at each input.
(4)
To lower it to 90 V the other
input must be at 125 V at least.
(5)
For each ºC of increase, the output power is reduced by 1.8 %.
(6)
Consumption from the PV array.
68
Unit description Ingeteam
ABE2011IQM01_C - Installation and Operation Manual