Ingeteam INGECON SUN 1Play 2.8TL U M, Инструкция по установке и эксплуатации

Страница: 24 / 84

7. Connection of accessories
Throughout this chapter, the process is explained for connecting the optional accessories in the unit, along with
the potential-free relay and the digital input.
Optionally, a communication system can be installed in order to establish a connection with the unit to monitor
and configure it, either locally or remotely, depending on the type of communication chosen and the needs of the
installation.
As standard these units have local communication via USB. In addition there is the option of establishing
connections using other technology types:
• RS-485.
• Ethernet (including communication via RS-485, for optional use).
• Ethernet TCP (including communication via RS-485, for optional use).
• GSM/GPRS (including communication via RS-485, for optional use).
• Bluetooth.
• Bluetooth (including communication via RS-485, for optional use).
See the corresponding communication accessories manual for further information.
The wiring must be routed inside the unit via a conduit, which is inserted through a coupling in order
to maintain the unit's protection class.
Read carefully before starting the connection process.
7.1. Safety instructions for connecting accessories
Make sure there is no voltage present on the unit before starting the connection.
Do not switch on the power to the unit until you have successfully made the rest of the connections
and the unit is closed.
Ingeteam accepts no liability for any damages caused by incorrect connection.
Use the personal protective equipment specified in the section “Personal Protective Equipment
(PPE)” .
24
Connection of accessories Ingeteam
ABE2013IQM01_ - Installation and Operation Manual