Ingeteam Ingecon mWind Interface, Руководство по установке

Страница: 9 / 36

AAY2000IKI06 9
Installation manual Ingeteam Power Technology, S.A.
1. Overview
1.1. Introduction
This manual aims to describe the Ingecon
®
μWind Interface (IWI) and provide adequate guidelines for correct recep-
tion, installation, commissioning, maintenance and operation.
1.2. Equipment description
The Ingecon
®
μWind Interface has been designed to work together with the Ingecon
®
µWind inverters in the control
and conversion of the energy generated by the wind turbine.
This equipment offers the following functions:
• Perform the AC-DC conversion, by adapting the AC voltage generated by the wind turbine to the Ingecon
®
µWind DC voltage input.
• Protect the system against an excessive rotational speed and over voltages and also to limit the power intake
when the wind turbine is operating in conditions with strong winds.
• Stop the wind turbine.
• Remote control of the installation and to monitor additional wind farm variables.
In addition to the capability of performing the AC-DC conversion, the Ingecon
®
μWind Interfaces also offer the possi-
bility of connecting wind turbines with a DC output voltage. In this case, the protection, monitoring and remote control
functionalities can still be used.
wind turbine
resistors*
communications
grid
Ingecon
®
μWind Interface
Ingecon
®
μ Wind
* resistors are not included with the equipment.