Ingeteam GB132-C1, Инструкция по установке и эксплуатации

Страница: 9 / 72

9
Safety Ingeteam
ABA2013IQM01_ - Installation and usage manual
EN
IT
The unit requires impurity-free air flow while it is operating.
Keeping the unit in the upright position and the inlets free of obstacles is essential for this air flow to
reach the inside.
After all duly authorised handling, check that the equipment is ready to start operation. Only after
this can it be connected following the instructions in the manual.
Do not touch boards or electronic components. The more sensitive components can be damaged or
destroyed by static electricity.
Do not disconnect or connect any terminal while the unit is operating. Disconnect and check for
absence of voltage first.
3.2. Personal Protective Equipment (PPE)
When working on the unit, use the following safety equipment recommended by Ingeteam as a minimum.
Name Explanation
Safety footwear In compliance with standard
UNE-EN-ISO 20345:2012
Helmet In compliance with standard EN 397:1995
Helmet with face shield
In compliance with Standard UNE-EN 166:2002 , wherever there are directly
accessible live parts.
Working clothes Close-fitting, non-flammable, 100% cotton
Dielectric gloves In compliance with standard
EN 60903:2005
Tools and/or equipment used in live work must have at least Category III-1000 Volts insulation.
Should the country’s regulations demand another kind of personal protection, the equipment recommended by
Ingeteam should be appropriately supplemented.