background image

Safety

Operation & Maintenance Manual

23221138 (12-07) Rev A

13

WARNING

Modification or alternation of this machine.

Can cause serious injury or death.

Do not alter modify this machine

without the express written consent of

the manufacturer.

Improper operation of this equipment.

Can cause serious injury or death.

Read Operator's Manual supplied with

this machine before operation or

servicing.

WARNING

Rotating fan blade.

Can cause serious injury.

Do not operate without

guard on place.

Disconnected air hoses whip.

Can cause serious

injury or death.

When using air tools

attach safety device

(OSHA valve) at source of

air supply for each tool.

WARNING

WARNING

Combustible gas.

Can cause serious burns,

blindness or death.

Keep sparks and open

flames away from batteries.

Falling of machine.

Can cause serious injury

or death.

Access lifting bail from

inside machine.

WARNING

WARNING

Door under pressure.
Can cause serious injury.

Use both hands to open door

when machine is running.

CAUTION

DO NOT WELD.
ELECTRONIC DAMAGE

WILL OCCUR.

This engine is equipped with an

electronic engine controller and

other electronic components.

WARNING

Excessive towing speed.

Can cause serious injury

or death.

Do NOT exceed 65 mph (105 km/hr.)

Collapsing jackstand.

Can cause serious injury.

Insert locking pin completely.

105

km/h

Содержание VHP40RMD
























































Отзывы: