Ingersoll-Rand Thermo King V-520 10, Руководство оператора

Страница: 19 / 74

Unit Description
19
The Electronic Control System is composed of an Electronic
Control Module (located inside the condenser unit) and the
In-cab Control Box. This In-cab Control Box allows the truck
driver to operate the Thermo King refrigeration unit.
Electronic Control System
Description
The Electronic Control System has the following
characteristics:
• Auto Start
• Soft Start
• Active Display
• Lit Keypad
• Total Hourmeter
• Vehicle Compressor Hourmeter
• Electric Standby Compressor Hourmeter
• Low Battery Voltage Alarm
• Buzzer
• Unit Control without In-cab Control Box
• Manual or Automatic Defrost
• Maintenance Warning
• Return Air Temperature Sensor
• Setpoint Temperature Reading
• Electric Power Warning
Auto Start:
Should the unit stop due to a failure in the power
supply, whether during on-the-road or electric standby
operation, it will start up again as soon as the power supply is
re-established.
Soft Start:
All operation modes remain inactive for 15
seconds after an Auto Start.
Active Display:
The In-cab Control Box display is always
active and backlit except when the unit is disconnected (no
power) or when the unit is connected but has been manually
switched off from the In-cab Control Box (when there is no
active alarm).
Lit Keypad:
The In-cab Control Box keys are always lit
except when the unit is disconnected (no power) or when the
unit is connected but has been manually switched off from the
Unit Description
19
The Electronic Control System is composed of an Electronic
Control Module (located inside the condenser unit) and the
In-cab Control Box. This In-cab Control Box allows the truck
driver to operate the Thermo King refrigeration unit.
Electronic Control System
Description
The Electronic Control System has the following
characteristics:
• Auto Start
• Soft Start
• Active Display
• Lit Keypad
• Total Hourmeter
• Vehicle Compressor Hourmeter
• Electric Standby Compressor Hourmeter
• Low Battery Voltage Alarm
• Buzzer
• Unit Control without In-cab Control Box
• Manual or Automatic Defrost
• Maintenance Warning
• Return Air Temperature Sensor
• Setpoint Temperature Reading
• Electric Power Warning
Auto Start:
Should the unit stop due to a failure in the power
supply, whether during on-the-road or electric standby
operation, it will start up again as soon as the power supply is
re-established.
Soft Start:
All operation modes remain inactive for 15
seconds after an Auto Start.
Active Display:
The In-cab Control Box display is always
active and backlit except when the unit is disconnected (no
power) or when the unit is connected but has been manually
switched off from the In-cab Control Box (when there is no
active alarm).
Lit Keypad:
The In-cab Control Box keys are always lit
except when the unit is disconnected (no power) or when the
unit is connected but has been manually switched off from the