Ingersoll-Rand Schlage AMGtime G Series, Руководство пользователя

Страница: 79 / 119

71
GT-400 Terminal User’s Guide Command Menu Reference: Security Menu
Set Passwords
Template Resolution
Template Resolution defines the template
resolution for the terminal. Choose Low to use
only low resolution templates for enrollments and
verifications. Choose High to use only high
resolution templates for enrollments and
verifications. Default: Dependent on kinds of readers in the
network. If the network contains only
G-Series readers, the default is High.
If the network contains F-Series and
G-Series readers, the default is Low.
Ran g e: Low or High
Dependencie s : none
Who: A site administrator specifies this
value to configure a network of hand
readers that are migrating from F-
Series to G-Series.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Security Menu.
3 Press Biometric Setup.
4 Press Template Resol.
5 Select the template resolution mode using .
6 Press Enter.
Set CLI Access Pwd
Set CLI Access Pwd sets the password for
command line access to the terminal. CLI access
is only available if all other conditions for enabling
CLI access have been met.
Default: none
Ran g e: Must match host application
password.
Dependencie s : Other conditions for CLI access must
be met before command line access
to the terminal will be available.
Who: An application developer can change
the CLI access password to enhance
security, or as a troubleshooting,
testing or debugging step.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Security Menu.
3 Press Set Passwords.
4 Press Set CLI Access Pwd.
5 Enter the CLI access password.
6 Press Enter.