Ingersoll-Rand Schlage AMGtime G Series, Руководство пользователя

Страница: 67 / 119

59
GT-400 Terminal User’s Guide Command Menu Reference: Setup Menu
XMLRPC Svr Setup
XMLRPC Svr Setup enables or disables the XML-
RPC server. The display of this menu will indicate
the current state of the XML-RPC server. If it is
disabled, press enable to enable the XML-RPC
server. If it is enabled, press disable to disable it. Default: enabled
Ran g e: none
Dependencie s : none
Who: A network administrator should set
XML-RPC server during initial
terminal setup.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Setup Menu.
3 Press Network Setup.
4 Press More.
5 Press XMLRPC Svr Setup.
6 Press Enable or Disable.
Set WebSvr Port
Set WebSvr Port defines the port you will use to
connect to the terminal's Web Server.
Default: 80
Ran g e: None
Dependencie s : Site's network specifications.
Who: A site administrator may change the
web server port from default to
comply with a site's network
specifications.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Setup Menu.
3 Press Network Setup.
4 Press More.
5 Press Set WebSvr Port.
6 Enter the web server port.
7 Press Enter.