55
GT-400 Terminal User’s Guide
Command Menu Reference: Setup Menu
Network Setup
The Network Setup menu is used to configure information that will be used by the terminal to
communicate with the host application. This information is only necessary when the terminal is used in
network mode.
Set Logical Name
Set logical name is used to set the name of the
terminal on the TCP/IP network. If the terminal
will be running in network mode, this name must
match the logical name for the terminal recorded
in the host application for synchronization to
occur.
Default:
G-Series Handreader
Ran
g
e:
none
Dependencie
s
:
none
Who:
A network administrator should set
the logical name during initial
terminal setup.
1
Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2
Press
Setup Menu.
3
Press
Network Setup.
4
Press
Set
LogicalName.
5
Enter the logical name for the terminal.
6
Press
Enter.
Set Host Username
The host user name is used to authenticate with
the host application. This user name must match
a valid user account user name on the host
application in order for synchronization to occur.
Default:
none
Ran
g
e:
none
Dependencie
s
:
none
Who:
A network administrator should set
the host user name during initial
terminal setup.
1
Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2
Press
Setup Menu.
3
Press
Network Setup.
4
Press
Set
HostUser.
5
Enter the user name for the host application.
6
Press
Enter.
Содержание Schlage AMGtime G Series
