R90 - 160N / R90 - 160I / R90 - 160NE / R90 - 160IE
http://www.ingersollrandproducts.com
WARNING
The use of the machine in any of the situation types listed in table 1:-
Is not approved by Ingersoll Rand,
May impair the safety of users and other persons, and
May prejudice any claims made against Ingersoll Rand.
a)
b)
c)
TABLE 1
WARNING
Use of the machine to produce compressed air for the following is not permitted:
direct human consumption
indirect human consumption.
Use of the machine outside the ambient temperature range specified in the
GENERAL INFORMATION SECTION
of this manual is not permitted.
Use of the machine where there is any actual or foreseeable risk of hazardous levels of flammable gases or
vapors is not permitted.
THIS MACHINE IS NOT INTENDED AND MUST NOT BE USED IN POTENTIALLY EXPLOSIVE ATMOSPHERES,
INCLUDING SITUATIONS WHERE FLAMMABLE GASES OR VAPORS MAY BE PRESENT.
Use of the machine fitted with non Ingersoll Rand approved components is not permitted.
Use of the machine with safety or control components missing or disabled is not permitted.
Connection to an electrical supply of incorrect voltage and/or frequency is not permitted.
The use of repair parts other than those included within the Ingersoll Rand approved parts list may
Create hazardous conditions over which Ingersoll Rand has no control. Therefore Ingersoll Rand cannot
be held responsible
Decrease compressor performance.
Increase maintenance.
Invalidate all warranties.
(For VSD only)
The motor rotor contains a powerful magnetic field. This field can effect the operation of digital devices such
as watches, mobile phones etc. Assembly or handling of the rotor should not be attempted by personnel with
cardiac pacemakers, defibrillators or other implanted electronic medical device.
This compressor contains a variable frequency drive. When it is switched off and the motor is stopped, the
internal capacitors store a potentially lethal high voltage. DO NOT REMOVE THE DRIVE COVER or attempt any
work on the drive unless trained. There are no user serviceable items behind the cover.
The compressor can operate in a pressurized shutdown mode. If the compressor stops automatically, the
airend, separator tank and oil system can contain high pressure air. This can be relieved by pressing the
emergency stop button and can be verified by unscrewing the coolant fill plug which has a vent hole through
which any residual pressure will be vented. Downstream of the separator tank may still contain system
pressure which must also be vented.
a)
b)
•
•
•
•
NOTICE
The manual is intended for worldwide use and contains both metric and imperial data where required.
2.0 FOREWORD