Ingersoll-Rand R90 - 160I, Руководство по эксплуатации и обслуживанию

Страница: 48 / 107

R90 - 160N / R90 - 160I / R90 - 160NE / R90 - 160IE
http://www.ingersollrandproducts.com
6
8.0 GENERAL INFORMATION
KEY
1 Air discharge
2 Compressor
3 Air filter
4 Vacuum transducer (1AVPT)
5 Cooler, air
6 Cooler, coolant
7 Condensate discharge
8 Coolant filter (s)
9A Pressure transducer, coolant filter out (5CPT)
9B Pressure transducer, coolant filter out (6CPT)
10 Drain valve, coolant
11 Oil cooler out temperature sensor 3CTT (Air
cooled only)
12 Air inlet/check valve
13 Electronic no loss condensate drain
14 Minimum pressure check valve
15 Moisture separator
16 Pressure transducer package disch. Press. (4APT)
17 Pressure relief valve
18 Scavenge filter / orifice / check valve
19 Separator tank
20 Oil temperature control valve
21 Temperature airend discharge (2ATT)
22 Blowdown solenoid valve 3SV
23 Drive motor - variable speed
24 Motor, blower - variable speed
25 Cooling air blower
26 Cooling water inlet (W.C. ONLY)
27 Cooling water outlet (W.C. ONLY)
28 Pressure transducer wet sump pressure (3APT)
29 Pressure relief valve (OPTION CHINA)
30 Remote air pressure transducer 9APT (optional)
31 Water shutoff valve 4SV (W.C.ONLY)
32 Package discharge air temperature sensor 4ATT
33 Injected coolant temperature sensor 2CTT
34 Orifice, seal scavenge air supply
35 Seal scavenge line drain
36 Package intake air temperature sensor 1ATT
37 Air/coolant separator element
38 Valve, aftercooler trim (W.C. ONLY)
39 Motor, blower (W.C. ONLY)
40 Interstage pressure relief valve
41 Interstage pressure transducer
PIPING LEGEND
Air/coolant
Air
Coolant
Condensate
Cooling water (W.C. only)
Compressor enclosure
Sensor connection
Sub-system boundry
Scope boundry
Ingersoll Rand SCOPE
CUST. SCOPE