E
2008
CCN 15207673
(800) 276-4658
D
FAX (800) 266-7016
fluids.ingersollrand.com
INGERSOLL RAND COMPANY LTD
P.O. BOX 151
D
ONE ARO CENTER
D
BRYAN, OHIO 43506-0151
1” DIAPHRAGM PUMP
OPERATOR’S MANUAL
PM10X-X-X-A02
RELEASED:
2-28-05
REVISED:
5-19-10
(REV. 06)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1:1 RATIO (METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637397 for air section repair (see page 6).
637401-XX for fluid section repair (see page 4). NOTE: This kit also con-
tains several air motor seals which will need to be replaced.
637395-X major air valve assembly (see page 7).
PUMP DATA
Models
see Model Description Chart for “-XXX”.
. . . . . . . . . . . . .
Pump Type
Metallic Air Operated Double Diaphragm
. . . . . . . . . .
Material
see Model Description Chart.
. . . . . . . . . . . . .
Weight
PM10A-CSS-XXX-A02
44.84 lbs (20.3 kgs)
. . .
. . .
PM10R-CSS-XXX-A02
38.2 lbs (17.3 kgs)
. . .
PM10S-CSS-XXX-A02
51.64 lbs (23.4 kgs)
. . .
Maximum Air Inlet Pressure
120 p.s.i.g. (8.3 bar)
. . . . . . . . .
Maximum Material Inlet Pressure
10 p.s.i.g. (0.69 bar)
. . . . .
Maximum Outlet Pressure
120 p.s.i.g. (8.3 bar)
. . . . . . . . . .
Maximum Flow Rate
(
flooded inlet
)
52.2 g.p.m. (197.6 l.p.m.)
. . . .
Displacement / Cycle @ 100 p.s.i.g.
0.232 gal. (0.88 lit.)
. . .
Maximum Particle Size
1/8” dia. (3.3 mm)
. . . . . . . . . . . .
Maximum Temperature Limits (diaphragm / ball / seal material)
E.P.R. / EPDM
-60
_
to 280
_
F (-51
_
to 138
_
C)
. . . . . . . . .
Polypropylene
35
_
to 1
75
_
F (2
_
to
79
_
C)
. . . . . . . . .
Santoprene
R
-40
_
to 225
_
F (-40
_
to 107
_
C)
. . . . . . . . . .
PTFE
40
_
to 225
_
F (4
_
to 107
_
C)
. . . . . . . . . . . . . . .
Dimensional Data
see page 8
. . . . . . . . . . . . . . . .
Mounting Dimension
4” x 6.25” (101.6 mm x 158.8 mm)
. . . . . . . .
Noise Level
@ 70 p.s.i., 60 c.p.m.
80.6 db(A)
{
. . . . .
The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability
.
Figure 1
MODEL DESCRIPTION CHART
PM10 X - C S S - X X X - A02
PM10X - CSS - X X X - A02
637401 - X X
Diaphragm
Ball
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: Model # PM10A-CSS-AAA-A02
Fluid Section Service Kit # 637401-AA
Seat Material
A - Santoprene
S - 316 Stainless Steel
Diaphragm Material
A - Santoprene
M - Medical Grade Santoprene
T - PTFE / Santoprene
Hardware Material
S - Stainless Steel
Fluid Caps & Manifold Material
S - Stainless Steel
Fluid Connection
C - 1-1/2” Tri-Clamp
Center Section Material
A - Aluminum
R - Polypropylene
S - Stainless Steel
Ball Material
A - Santoprene
T - PTFE
11-11-10
07)
