Ingersoll-Rand G 270, Руководство пользователя и инструкция по обслуживанию

Страница: 6 / 214

1. P
REAMBLE
1.1. Introduction
1.1.1 General recommendations
Thank you for choosing an electrical generating set from our company.
This manual has been designed to help you operate and maintain your electrical generating set
correctly.
Read the safety instructions carefully in order to prevent any accident, incident or damage.
These instructions must always be followed.
In order to obtain optimum efficiency and the longest possible life for the electrical generating
sets, maintenance operations must be carried out according to the periods indicated in the
attached preventative maintenance tables.
If the electrical generating set is used under dusty or unfavourable conditions, some of these
periods will be shorter.
Ensure that all adjustments and repairs are carried out by personnel who have received the
appropriate training. The dealers are suitably qualified and can answer all of your questions.
They can also supply you with spare parts and other services.
The left and right sides can be seen from the back of the electrical generating set (the radiator
is at the front).
Our electrical generating sets have been designed so that damaged or worn parts can be
replaced by new or reconditioned parts thereby reducing the out of action period to a
minimum.
For all parts replacement, contact your nearest dealer representing our company who will
have the necessary equipment and properly trained and informed staff to carry out
maintenance, parts replacement and even total reconditioning of generating sets.
Contact your local dealer for the available repair manuals and to make the necessary
arrangements for training personnel in implementation and maintenance.
IMPORTANT
Some user manuals and maintenance manuals for the engines fitted to the electrical
generator assemblies include information on the control units and detail the engine
starting and stopping procedures.
As the electric generator assemblies are fitted with assembly-specific test and
control panels, only the information in the documentation regarding the panels fitted
to the assemblies should be taken into consideration.
- 4 -