Ingersoll-Rand FA10i, Информация по техническому обслуживанию продукции

Страница: 3 / 20

Table 2: Inspection Classifications
Conditions Normal Heavy Severe
Typical Use (operating time) Infrequent Regular Continual/Constant
Load Range 60% of Capacity 75% of Times Used 80% of Capacity 75% of Times Used 100% of Capacity 75% of Times Used
Installation Protected/Enclosed/Dry Not Sheltered/Exterior Full Exposure
Atmosphere Clean/Non-Corrosive Dirty/Non-Corrosive/Freshwater Marine Dirty/Corrosive/Saltwater Marine
Climate Dry/Stable Temperature Wet/Moderate Temperature Fluctuations Wet/Severe Temperature Fluctuations
n
Records and Reports
Inspection records, listing all points requiring periodic inspection should be
maintained for all load bearing equipment. Written reports, based on severity of
service, should be made on the condition of critical parts as a method of
documenting periodic inspections. These reports should be dated, signed by the
person who performed the inspection, and kept on file where they are readily
available for review.
n
Maintenance Intervals
Refer to Table 3 ‘Maintenance Interval Chart’ on page 4for recommended
maintenance schedule.
Form MHD56401 Edition 3 3