VILLAGER 6 ELECTRIC
Operators Manual
TPCC01BO00EN021 (Edition B)
Page 63
To lower the rear of the vehicle:
1.
Place the jack in the center of the lift point.
2.
Lift the vehicle off of the jack stands.
3.
Remove the jack stands.
4.
Lower the vehicle.
TIRE PRESSURE MEASUREMENT
Before the tire pressure measurement:
• Disable the vehicle.
To measure the tire pressure:
1.
Remove the valve stem cap.
2.
Use a pressure gauge to measure the tire pressure.
3.
Adjust to meet the recommended tire pressure.
Note:
Go to the approved wheel and tire assemblies matrix on
for
information regarding tire type, inflation pressure, and lug nut torque.
4.
Install the valve stem cap.
WHEEL ASSEMBLY
WHEEL ASSEMBLY REMOVAL
Before the wheel assembly is removed:
Содержание Club Car VILLAGER 6 ELECTRIC
