Page 62
TEMPO AND TEMPO CONNECT GASOLINE
Operators Manual
TPCC01BM00EN017 (Edition E)
2.
Use a spark plug socket to install and tighten the spark plug to:
SPARK PLUG TYPE
TORQUE SPECIFICATION
New spark plug
120 lb·in (13.5 N·m)
Used spark plug
216 lb·in (24.5 N·m)
3.
Connect the spark plug wire.
4.
Connect the battery.
TIRE PRESSURE MEASUREMENT
Before the tire pressure measurement:
• Disable the vehicle.
To measure the tire pressure:
1.
Remove the valve stem cap.
2.
Use a pressure gauge to measure the tire pressure.
3.
Adjust to meet the recommended tire pressure.
Note:
Go to the approved wheel and tire assemblies matrix on
for
information regarding tire type, inflation pressure, and lug nut torque.
4.
Install the valve stem cap.
WHEEL ASSEMBLY
WHEEL ASSEMBLY REMOVAL
Before the wheel assembly is removed:
• Disable the vehicle.
To remove the wheel assembly:
1.
Remove the wheel cover.
2.
Loosen the lug nuts.
3.
Lift the vehicle to allow for removal of the wheel assembly.
4.
Remove the lug nuts.
5.
Remove the wheel assembly.
WHEEL ASSEMBLY INSTALLATION
Before wheel assembly installation:
• Disable the vehicle.
To install the wheel assembly:
1.
Lift the vehicle to allow for installation of the wheel assembly.
Содержание Club Car TEMPO
