Ingersoll-Rand 570811001, Руководство по обслуживанию

Страница: 29 / 41

BL-275 Loader Backhoe
Revised Apr. 03 10-70-1 Service Manual
SERVICE SCHEDULE
Chart
Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures. The
service schedule is a guide for correct maintenance of the Ingersoll Rand loader backhoe.
WARNING
Instructions are necessary before operating or servicing machine. Read
and understand the Operation & Maintenance Manual and signs (decals) on
machine. Follow wa rnings and instructions in the manuals when making
repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-1285
SERVICE SCHEDULE HOURS
ITEM SERVICE REQUIRED
8-10 50 100 250 500
■
1000
Engine Oil Check the engine oil level and add as needed.
Hydraulic Fluid Check fluid level and add as needed.
Fuel Filter Remove trapped water.
Engine Air System Check for leaks and damaged components.
Engine Cooling System Clean debris from oil cooler, radiator & grill. Check cool-
ant level.
Lift Arms, Cyl., Bob-Tach
Pivot Pins, Wedges, Etc. Lubricate with multi-purpose lithium based grease.
Tires Check for correct size, damaged tires and correct air
pressure.
Seat Belt, Seat Belt
Retractors Check the condition of seat belt. Clean or replace seat
belt retractors as needed.
Mirrors Clean, adjust, replace if damaged
Steering Valve Check and set steering as required.
Safety Signs and Safety
Treads Check for damaged signs (decals) and safety treads.
Replace any signs or safety treads that are damaged or
worn.
Operator Cab Check the fastening bolts, washers and nuts. Check the
condition of the cab.
Indicators and Lights Check for correct operation of all indicators and lights.
Parking Brake Check operation, adjust as required.
Backup Alarm Check operation. Repair or replace as required.
Hydraulic Fluid, Hoses and
Tubelines Check fluid level & add as needed. Check for damage &
leaks. Repair or replace as needed.
Front and Rear Differential Check oil level. Add oil as needed.
Wheel Nuts Check for loose wheel nuts and tighten to 140 ft.-lbs. ❏
Battery Check cables, connections and electrolyte level. Add
distilled water as needed.
Spark Arrestor Muffler Empty the spark chamber (if equipped).
Alternator/Fan Belt Check tension and adjust as needed.
*
Fuel Filter Replace the filter element. ●
Engine Oil and Filter Replace oil & filter. Use CD or better grade oil and
Ingersoll Rand filter. †
Hydraulic Oil Filter Replace the filter element.
Engine Air Filter Replace the air filter element.
#
Engine Cooling System Flush cooling system and add new coolant.
Hydraulic Reservoir Replace the fluid and the filter.
Differential Oil Replace the differential oil.
❏
Check wheel nut torque every 8 hours for the first 24 hours.
*
Inspect the new belt after first 50 hours.
● Also replace hydraulic/hydrostatic filter element when the transmission warning light comes ON.
†
First oil and filter change must occur at 50 hours: 250 hours thereafter.
# After the first 500 hours on new engine, adjust engine valves; 1000 hours thereafter. (See Service Manual for procedure.)
■ Or every 12 months.
29 of 796