SKYZER TECHNOLOGIES
PAGE 44 OF 140
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
16.0
START TCP-IP Y/N
Terminal prompts to start TCP-IP link. Press
ENTER
to start the link or
CLEAR
to
exit without starting.
6.4.1
TCP-IP with WIFI as Backup Configuration
1.0
IP PRIMARY
HOST PORT
33876
This parameter specifies the Primary TCP/IP Port Number of Paymark network.
Press
ENTER.
2.0
IP SECONDARY
HOST PORT
33876
This parameter specifies the Secondary TCP/IP Port Number of Paymark network.
Press
ENTER
.
3.0
ENABLE DHCP Y/N
1-YES 2-NO
Press the corresponding number key and press
ENTER
to set the IP address for the
terminal.
Option 1
– to allow the terminal to dynamically obtain its IP address and proceed
with step 7.0.
Option 1 is selected by default
.
Option 2
– to enter in static IP address for the terminal and proceed with step 4.0
4.0
TERM IP ADDRESS
XXX.XXX.XXX.XXX
Enter in the static IP address for the terminal.
Example: 192.10.1.14
Note:
Press the
FUNC
key to insert a dot in between numbers.
5.0
SUBNET MASK
XXX.XXX.XXX.XXX
Enter in the subnet mask for the static IP address.
Example: 255.255.255.0
6.0
GATEWAY IP ADDR
XXX.XXX.XXX.XXX
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
7.0
DNS1 IP ADDR
XXX.XXX.XXX.XXX
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
8.0
DNS2 IP ADDR
XXX.XXX.XXX.XXX
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
9.0
USE DNS Y/N
1-YES 2-NO
Press the corresponding number key and press
ENTER
to set for DNS or IP
Option 1
– to allow the terminal to use Paymark DNS address.
Option 1 is
selected by default
.
10.0
IP Primary
HOST DNS
direct.paymark.co.nz
This parameter specifies the Paymark Primary DNS address. By default, it is set to
direct.paymark.co.nz
. Press
ENTER
