SKYZER TECHNOLOGIES
PAGE 126 OF 140
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
9 DIAGNOSTICS
This function allows the merchant to perform diagnostic functions to aid in the
maintenance of the terminal.
Step
Terminal Display
Description
1.0
Press
FUNC.
2.0
FUNCTION?
Enter
9904
, press
ENTER.
3.0
SELF TEST?
ENTER OR CLEAR
Press
ENTER
to continue with the self test
CLEAR
to cancel and return to idle
prompt.
4.0
CARD READ TEST?
ENTER OR CLEAR
Press
ENTER
to start
CARD READ TEST
,
CLEAR
to
bypass
CARD READ TEST
or
CANCEL
to cancel and return to idle prompt.
4.1
SWIPE CARD
Swipe a magnetic stripe card through the magnetic stripe card reader. Press
ENTER
or
CLEAR
to go to chip read test.
4.2
GOOD CARD READ
Displays if the terminal is successful to read the magnetic stripe data.
4.3
BAD CARD READ
Displays if the terminal is unable to read the magnetic stripe data.
5.0
CHIP READ TEST?
ENTER OR CLEAR
Press
ENTER
to start
CHIP READ TEST
,
CLEAR
to
bypass
CHIP READ TEST
or
CANCEL
to cancel and return to idle prompt.
5.1
INSERT CARD
Insert the chip card into the chip card reader slot in the terminal. Press
ENTER
or
CLEAR
to go to keyboard test.
5.2
CARD OK
Displays if the terminal is successful to read the chip card contact.
5.3
CARD IS MUTE
Displays if the terminal is unable to read the chip card contact.
5.4
REMOVE CARD
Remove card from the chip card reader slot.
