15
4. Press
[3]
to select
Setup Menu
.
5. Press
[2]
to select
Communications
.
6. Press
[2]
to select
Bluetooth
.
7. Press
[3]
to select
Paired Device Info
.
7 – ACCEPTING PAYMENT CARDS
To Conduct a Chip Card Transaction
1. Initiate the transaction on the mobile
device (smartphone or tablet).
2. Follow the prompts on the iCMP
si
terminal screen accordingly.
3. Position the chip card with the chip-side facing
upward, as shown below.
4. Insert the chip card into the smart card reader slot in a smooth,
continuous motion until it is firmly in place.
5. Remove the card only when the application indicates the
transaction is complete.
CAUTION:
Leave the chip card in the reader until the
transaction is complete. Premature card removal
will invalidate the transaction.
To Conduct a Magnetic Stripe Transaction
1. Initiate the transaction on the mobile device (smartphone or tablet).
2. Follow the prompts on the iCMP
si
terminal screen accordingly.
3. Position the magnetic card with the stripe in the card reader, facing
inwards towards the keypad.
4. To ensure a proper read of the magnetic stripe card, the user
should insert the card from the top of the unit, as shown below.
5. Swipe the card through the magnetic card reader in a single
smooth motion.
